Apex Radon Defense Before & After Photos

WE installed a sub slab depressurization system on a new construction slab home with radon levels at 22pCi/L.  We were able to minimize the visibility of the interior piping by routing it through a closet and out of the way of daily life. Client was thrilled when the post mitigation results came back at 0.2pCi/L, as low as you can possible reduce radon levels!

Apex Radon Defense was hired to replace an old, damaged radon mitigation system with a new system. We removed all the old piping and fan and replaced it with a new system that lowered the radon far more than the previous system had. Client was relieved to have the problem rectified!

Apex was hired to install a sump suction system on a basement home with radon at 10. We sealed up the sump and brought the levels down to 1.5. Client was happy with the results and fast turnaround time!

Client called us to lower the radon in a slab home that was reading at 12.  ARD installed a Active Slab Depressurization system and lowered the levels to below 2.0.  Client was very happy to have the radon brought down to safer levels in their home!

Apex was contacted to install a radon gas mitigation system on a finished basement. We sealed up the sump lid and installed a sump suction system and brought it outside for a nice hidden install on the back of the house.  Another healthy home completed!