Click on a photo to enlarge.
We were hired to install a radon gas mitigation system on a home on an unfinished basement with two sump pits. We sealed up both sumps and created a suction point on one of the lids to pull radon contaminated air out of the home and exhaust it above the roof. The levels were brought down quickly and now the homeowners are finishing the basement now that it is a healthy space!
Apex was contacted to install a radon gas mitigation system on a finished basement. We sealed up the sump lid and installed a sump suction system and brought it outside for a nice hidden install on the back of the house. Another healthy home completed!
We were contacted by a client to install a radon gas mitigation system and replace both existing sump pumps. The sump pits needed to be patched with concrete and then sealed with lids after the pumps were swapped out. We were able to add some sounds dampening features to the system and the homeowner was unable to hear the fan from inside the house and of course the radon levels were successfully lowered.
WE installed a sub slab depressurization system on a new construction slab home with radon levels at 22pCi/L. We were able to minimize the visibility of the interior piping by routing it through a closet and out of the way of daily life. Client was thrilled when the post mitigation results came back at 0.2pCi/L, as low as you can possible reduce radon levels!
Apex Radon Defense was hired to replace an old, damaged radon mitigation system with a new system. We removed all the old piping and fan and replaced it with a new system that lowered the radon far more than the previous system had. Client was relieved to have the problem rectified!
our service area